Iteration Titanium Panel Post Processing

Iteration Titanium Panel Post Processing

Operations

  • Drill out armor mounts with 0.5”
  • Drill out 10-32 through holes with 13/64” drill bit
  • Deburr all cut edges
  • Sand Surface for paint
  • Clean with Simple Green mix
  • Wipe down with iso
  • Allow to dry fully
  • Apply Primer
  • Apply 2 coats of black spray paint
Test fit complete, need to adjust a few things to prepare for paint
Test fit complete, need to adjust a few things to prepare for paint
image
Wire brushing done
Wire brushing done
Iso scrub
Iso scrub
image
Primer Applied
Primer Applied
First coat of black applied
First coat of black applied
image
image